Conveyor Belt System Carbon Steel Belt

HuoLong 10-12mm High-Strength Conveyor Belt Fastener

• Model No.: HLGK-12mm

HuoLong HLGK2000N 10-12mm High-Strength Conveyor Belt Fastener has a stronger and thicker body and a larger diameter. It also has the advantages of higher joint strength and lower relative density. The fasteners are directly embedded into the pin body, which makes it durable and resistant to abrasion. Model （mm） The...

Contact Now

HL2000² High-Strength Linked Conveyor Belt Fastener

• Model No.: HL2000² 22#

With the even distribution of stress and high straightness accuracy, the linked conveyor belt fasteners are easy to connect. The reasonable layout of the fasteners effectively alleviates the abrasion of the conveyor belts and increases the joint strength. With the wide-buckle structure, the extrusion stress of the...

Contact Now

HuoLong HL2000² High-Strength Linked Conveyor Belt Fastener

• Model No.: HL2000² 24#

HuoLong HL2000² High-Strength Linked Conveyor Belt Fastener With the even distribution of stress and high straightness accuracy, the linked conveyor belt fasteners are easy to connect. The reasonable layout of the fasteners effectively alleviates the abrasion of the conveyor belts and increases the joint strength....

Contact Now

T10/26# medium needle belt buckle

• Model No.: T10/26#

Size T10/26# The Thickness of the Conveyor Belt 12-14mm The Strength of the Conveyor Belt ≦1400

Contact Now

2002N-12mm Internal buckle conveyor belt fasteners

• Model No.: 2002N

Model The Thickness of the Conveyor Belt (mm) The Tensile Strength of the Conveyor Belt (N/mm) The Minimum Diameter of the Wheel (mm) HLGK-12mm

Contact Now

2002N-14mm Internal buckle conveyor belt fasteners

• Model No.: 2002N

2002N-14mm Internal buckle conveyor belt fasteners is composed of two U-shape nails and U-shape buckles. The interlaced layout of the interior structure increases the joint strength and lowers the density of the fasteners. The fasteners are directly embedded into the pin body, which makes it durable and resistant to...

Contact Now

High-Strength Stainless Steel Belt Fastener

• Model No.: Stainless Steel Belt Fastene

The high-strength stainless steel belt fastener is made of high-strength stainless steel sheet with high-strength joints, whose tensile strength reaches 2500N/mm. It can apply to the ordinary belt with the turning device. With the interlaced structure of pins, the density of the fasteners is lowered. The fasteners are...

Contact Now

T10 22 Belt Fastener

• Model No.: T10/22

T10 conveyor belt fastener can apply to a variety of conveyor belts, the width of which vary from 7.5mm to 16mm. It is suitable for linking the deep-trough conveyor belts of which the groove angle is over 45 degree. With the interlaced structure of the pin body, the density of the fasteners is greatly lowered. And the...

Contact Now

Six Nail Belt Fastener

• Model No.: Six nail hammer

Six nail Conveyor Belt Fastener Advantages of Six nail Conveyor Belt Fastener With the introduction of the German technology and in accordance with our basic conditions of utilizing the conveyor belts, our technicians have successfully developed the new-generation patented product. With its reasonable design and good...

Contact Now

Stainless Steel Belt Fastener

• Model No.: Stainless Steel

Stainless Steel Belt Fastener is made of high-strength stainless steel sheet with high-strength joints, whose tensile strength reaches 2500N/mm. It can apply to the ordinary belt with the turning device. With the interlaced structure of pins, the density of the fasteners is lowered. The fasteners are directly embedded...

Contact Now

DK I Basic Belt fastener

• Model No.: DK I

DK I Basic Belt fastener is suitable for conveyor belt of which the strength level is 6 or 6 below. It is made of high-quality carbon steel and processed through special techniques. Owing to the refinement of its internal structure and the hardening of its surface, it has the advantages of high strength of extension,...

Contact Now

DK II Basic Belt fastener

• Model No.: DK II

DK II Basic Belt fastener is suitable for conveyor belt of which the strength level is 6 or 6 below. It is made of high-quality carbon steel and processed through special techniques. Owing to the refinement of its internal structure and the hardening of its surface, it has the advantages of high strength of extension,...

Contact Now